35KHZ 100W Ultrasonic PCB Generator For Car carbon deposition

It is normal that there are carbon deposits on the surface of oil stains of automobile engine parts, such as poor air quality, insufficient oxygen supply, insufficient combustion, road conditions (emergency stop and hurry), forced ventilation of crankshaft (frankly speaking, it is not directly ventilated through air inlet filtration), the quality of gasoline itself, and the characteristics of EFI vehicles (the vehicles with electronic control and then injection system are prone to carbon deposits), In this way, the process requirements of auto parts are still very high. In production, it is necessary to decontaminate and clean the surface and inner cavity of parts to meet the needs of particle size and cleanliness of the surface and inner cavity of parts. In the auto repair industry, it is also necessary to thoroughly clean the disassembled parts during fine cleaning, so it is more suitable to use industrial ultrasonic cleaning machine to clean engine parts, which can achieve the purpose of fast, simple, labor-free and cost saving.

 

 

At present, the cleaning of industrial spare parts hopes to meet the relevant requirements of the particle size and cleanliness of the surface and inner cavity. Generally, kerosene is used to clean the workpiece. However, kerosene cleaning is not only a problem of high cost and consumption, but also causes considerable harm to the environment and the operator's body. The ultrasonic cleaning machine can perfectly solve this problem. Its cleaning principle is to use the perfect combination of ultrasonic physical cleaning and chemical cleaning of cleaning solution, and can choose the ultrasonic frequency band and power density to fully and thoroughly clean the internal and external oil dirt, carbon deposit, colloid and other dirt of various parts. Therefore, it is the best choice to use ultrasonic wave to clean the carbon deposition of auto engine cylinder parts.

Type	Frequency (KHz)	Power(W)
PU-XLB100	28-35	10