33khz Ultrasonic Vibrating Sieve Shaker transducer

Some details of ultrasonic vibration screen transducer should be paid attention to. The main use methods of ultrasonic vibration screen transducer are as follows:

① Firstly, the transducer is locked on the grid attached with the net (the locking force is 40 ~ 50kg), and then the ultrasonic grid is loaded into the vibrating screen.

② The power supply of ultrasonic vibration screen and rotary vibration screen are respectively supplied. The power supply of rotary vibration screen is three-phase power supply, and the power supply of ultrasonic vibration screen is single-phase power supply. Both of them need reliable grounding.

③ The output of the back panel of the power supply of the ultrasonic vibration screen is the ultrasonic output. Please insert the ultrasonic HF connecting wire into the lock and check that the link is reliable.

The other end of the antenna is firmly connected with the HF cable.

④ Connect the power supply and HF link cable of ultrasonic vibration screen, and turn on the ultrasonic power switch after checking.

With the sound of "drop", the power supply of ultrasonic vibration screen starts, and the display window displays "vibration amplitude XXX μ m", and enters the self inspection state. The vibration amplitude can be adjusted by adjusting the amplitude knob.

Type	Frequency（KHz）	Input Power（W）
PU-UVT-33	33KHZ	100W
PU-UVT-35	35KHZ	100W