Plastic Injection Molds with Ultrasonic Cleaners

Molds ultrasonic cleaner, also known as electrolytic ultrasonic mold cleaning machine, is a kind of electrolytic cleaning machine. Mold cleaning machine is mainly composed of ultrasonic generator system, electrolytic circuit system, circulating filter system, The ultrasonic cleaning machine uses water-based solvent as the cleaning agent. It is mainly used for mold oil removal, dust removal, touch removal agent and the cleaning before and after electroplating parts. It has good cleaning effect for various metal mechanical parts.

Advantages of mold ultrasonic cleaner:

1. The electrolytic cleaning system emits gas to the metal surface to remove the dirt, impurity and sundries on the metal surface with the effect of sauna cleaning. It can also completely remove the resin components and moisture; through ultrasonic vibration, the dirt is peeled off and floated, and the metal is attached to the cathode, and even the dirt in the dead corner can be completely removed.

2. Restore the metal to the original copper green, restore the original beauty of the metal.

3. Even complex shapes can remove dirt.

4. It can achieve the purpose of cleaning and decontamination.

5. It has good rust removal and rust prevention effect.

6. Generally speaking, it will save about an hour than manual cleaning.

7. It is more environmentally friendly and safer than using organic solvents.

8. Can greatly reduce the bad rate after cleaning.

9. This cleaning machine has a long service life, generally at least five years.

10. The purchase cost and use cost of the whole machine are reasonable.

Type	Frequency (Khz)	Power(W)	Capacity(L)
PU-30LTT	28KHZ,40KHZ	1500	30
PU-50LTT	28KHZ,40KHZ	2500	50
PU-70LTT	28KHZ,40KHZ	3500	70