Oil Filtration System Industrial Ultrasonic Cleaner

Filtration System ultrasonic cleaning machine

1. A wide frequency sweep circuit is adopted. With the change of liquid temperature, the ultrasonic frequency sweeps back and forth in the range of about ± 1kHz of the central frequency. According to the grid frequency, 50 times per second can be driven to form fine backflow of cleaning fluid and cavitation bubbles, completely eliminate the cleaning blind area caused by standing wave field, and make each energy converter reach the optimal resonance state.

2. The high-power module is used to control, the output power is strong, and the safety performance of the generator of the electric control cabinet is greatly improved, and the normal operation of the transducer is effectively protected; at the same time, the built-in soft start system can reduce the strong impact of the current on the energy converter when starting, and prolong the service life of the transducer.

3. The high frequency ultrasonic transducer can not only clean the gap deeply, but also do not damage the surface of the workpiece. It has the characteristics of high bombardment intensity, fast cleaning speed, high ultrasonic density and good penetration;

4. The over-voltage, over temperature and over-current protection circuit is designed, which is safe and reliable.

5. Install pneumatic sealing cover to prevent heat emission or solvent volatilization during operation

6. Equipped with timing switch, the cleaning time can be set by oneself

7. The filter circulation device can filter the impurities generated after solvent cleaning, so that the solvent can be used repeatedly. Due to the advanced technology, its cleaning capacity can be automatically recycled, and the cleaning agent is separated from the cleaning agent by physical filtration, which greatly reduces the cleaning operation cost. The system adopts automatic circulation filtration mode and adopts safe and reliable anti-corrosion pump to filter the cleaning agent through the filter screen and professional precision filter, which can effectively separate and remove the pollutants, micro particles, oil, dust and other pollutants and impurities in the cleaning solution, so as to ensure that the cleaning agent is always in a clean and efficient cleaning state, and at the same time, it can minimize the time when the workpiece is taken out The secondary pollution caused by the pollutants in the cleaning solution.

Type	Internal size L*W*H (mm)	Frequency (Khz)	Power(W)	Heating(W)
PU-XH1006ST	280×210×210	20,28,33,40,80,130	300	100
PU-XH1012ST	400×310×280	20,28,33,40,80,130	600	300
PU-XH1018ST	490×360×320	20,28,33,40,80,130	900	500
PU-XH1024ST	630×430×320	20,28,33,40,80,130	1200	1000
UCE-XH1030ST	630×530×320	20,28,33,40,80,130	1500	1000
PU-XH1036ST	680×530×360	20,28,33,40,80,130	1800	1000
PU-XH1040ST	680×570×400	20,28,33,40,80,130	2000	1000
PU-XH1041ST	730×570×450	20,28,33,40,80,130	2400	2000
PU-XH1042ST	790×670×510	20,28,33,40,80,130	3000	2000
PU-XH1043ST	850×770×570	20,28,33,40,80,130	4000	2000
PU-XH1044ST	910×820×620	20,28,33,40,80,130	5000	3000
PU-XH1045ST	960×870×680	20,28,33,40,80,130	8000	4000
PU-XH1046ST	1100×930×730	20,28,33,40,80,130	10000	5000