Molds Dies And Tools Industrial Ultrasonic Parts Cleaner

Focusing on the mold ultrasonic cleaner, mainly for the mold industry to solve the cleaning gas gas, carbon, high temperature residues, oil, rust and other cleaning problems, to avoid manual cleaning mold damage, AVO Ultrasonic Electrolytic mold cleaning machine cleaning mold fast, can also protect the mold repair role.

50L l mould cleaning machine equipment

Model: Hardware mold cleaning machine

Use of cleaning fluid: for special mold cleaning solution

Size of inner groove: l × w × H (mm) 550 × 300 × 280

Exterior dimension: l × w × H (mm) 850 × 500 × 850 (about)

Ultrasonic generator: a set of built-in type

Ultrasonic power: 900W

A set of electrolytic machine: voltage 0-15v, current 0-50a, built-in electrolytic mold ultrasonic cleaner cleaning process: the electrolytic ultrasonic system is composed of ultrasonic generator system, electrolytic circuit system, circulating filter system, special gold type cleaning fluid and water-based rust inhibitor

The electrolytic cleaning system emits gas to the metal surface to remove the dirt and impurities on the metal surface with the effect of sauna, and completely remove the resin components; the dirt is stripped and floated by ultrasonic vibration, and the metal is attached to the cathode, and even the dirt in the small corner can be completely removed

Restore the metal to its original beauty.

Even complex shapes can remove dirt.

It can clean and decontaminate completely.

Good rust removal and rust prevention effect.

It can save one hour than manual cleaning.

It is more environmentally friendly and safer than using organic solvents.

Greatly reduce the bad rate after cleaning.

Process: 1. Gold mold cleaning → 2. Flowing water cleaning → 3. Antirust engineering.

Scope of application: metal plastic mold, precision mold, semiconductor, medical, communication, auto parts, etc

Type	Frequency (Khz)	Power(W)	Capacity(L)
PU-30LTT	28KHZ,40KHZ	1500	30
PU-50LTT	28KHZ,40KHZ	2500	50
PU-70LTT	28KHZ,40KHZ	3500	70